Corrugated paperboard feeding unit of Flexo printer RDC:
◎Servo motor independent drive, with Japan Shimpo corrugated paperboard feeding reducer, high precision, no wear.
◎Servo motor driven roller lead edge corrugated paperboard feeding system.
◎Corrugated paperboard eliminates dust that is difficult to brush off due to the effect of static electricity on dust particles.
◎Flexo printer die cutter can feed corrugated paperboard continuously or in intervals.
◎With Installing static electricity removal device.
Dust removal unit of Flexo printer RDC:
◎The sticky roller sticks the remaining tiny particles to the surface of the sticky roller, so that the solid printing effect is flawless, effectively reducing the number of shutdowns and smearing.
◎The flexo printer die cutter is equipped with a dust removal unit after the corrugated paperboard feeding unit, which can reliably guarantee high-screen fine printing and large solid printing.
◎2 sets of powerful negative pressure dust suction fans completely remove the dust brushed up by the brush.
◎8 sets of brushes brush up the dust on the surface of the cardboard.
Printing unit of Flexo printer RDC:
◎Double-cylinder ink supply system, install two sets of anilox cylinders and ink supply systems with different mesh lines in the same printing unit. One-click switching can print coated corrugated paperboard, liner corrugated paperboard, high and low mesh line products.
◎Precision adjustment system can accurately adjust the printing gap and ink transfer gap.
◎The plate cylinder deviation correction device can quickly and easily correct the skewed printing caused during plate hanging.
◎Each printing unit of the flexo printing die cutting machine can be equipped with a Swiss Leister hot air drying infrared drying system.
◎The double diaphragm pump ink supply system ensures fast ink filling and ink return.
◎The closed double-squeegee system, combined with the imported inking and return device of the ceramic anilox rolls, can significantly improve the single-color and multi-color dot printing and overprinting effects.
◎Each unit of the flexo printer rotary die cutter is independently driven by dual servo motors, without gear cumulative error, printing and embossing, which can achieve complete synchronization, high-definition images can be achieved, simple structure and easy maintenance.
◎Printing registration accuracy ±0.15mm.
◎Vacuum adsorption cylinder transfer printing can ensure thin board and warped cardboard printing.
Drying unit of Flexo printer RDC:
◎Servo motor drive, high conveying accuracy.
◎The flexo printing die cutting machine has an infrared drying system.
◎The flexo printing die cutting machine has an infrared heating system, which can quickly and stably increase the temperature. The heating power of each group is about 36kw.
◎Temperature constant temperature control, segmented heating, saving electric heating power.
Die-cutting unit of Flexo printer RDC:
◎Independent servo motor drive.
◎Flexo printer rotary die cutter is equipped with imported high-strength anvil covers, easy to replace, economical and affordable.
◎Phase control is directly controlled and adjusted by servo motors.
◎Centrally control the printing slotting and die-cutting phase, and can be fine-tuned during operation.
◎The axial displacement of the die-cutting cylinder is electrically adjusted, and the touch screen displays the adjustment amount. The adjustment amount is ±10mm, which is convenient for alignment.
◎The flexo printer die cutter is made of high-quality steel and is precisely manufactured with hard chrome plating on the surface.
◎After static balancing, dynamic balancing correction is performed to ensure operational stability.
◎The left and right lateral movement of the die-cutting cylinder is ±10mm, and it is electrically adjusted. The human-machine interface sets automatic positioning.
◎Die-cutting cylinder (lower cylinder).
◎Anvil covers cylinder (upper cylinder).
◎The flexo printer rotary die cutter is made of high-quality steel with precision manufacturing, surface grinding and hard chrome plating, which is durable.
◎After static balancing, dynamic balancing correction is performed to increase operational stability.
◎Electric adjustment of the gap with the die-cutting cylinder.
◎Mechanical differential compensation mechanism compensation range ±2mm.
◎Mechanical stretching, lateral movement ±20mm. And an overload protection device is added.
◎The flexo printer rotary die cutter is equipped with anvil covers repair system. The anvil covers can be repaired twice, which maximizes the service life of the anvil covers and reduces costs.
◎All gap adjustments are electric adjustments, and the touch screen displays the adjustment amount. The human-machine interface sets automatic positioning.
