Pressure Rewinder Machine For Single Facer
Main features of our Pressure Re-winder Machine For Single Facer as below:
Control hot plate
1. After the corrugated paper is glued, it is heated and formed into a double-sided hot piece, and it becomes a plate after cooling.
2. Hot plate width 520mm and 10 pictures, cooling part of 4 meters.
3. The heat conduction pipe of the hot plate controls the temperature segment and displays the temperature.
A small amount of adjustment
4. The inside of the hot plate is a partition isolation structure, so that the steam flows in the S-shape direction, and the soda water separation function is obvious, so as to improve the steam utilization efficiency.
5. The upper belt adopts double cylinder S-type tensioning device, and the lower belt adopts manual tensioning device (a small amount of adjustment).
6. The surface of the driving roller is wrapped with rubber of medium height to ensure smooth output of the plate.
Our Pressure Re-winder Machine For Single Facer is Stable to be used and repaired easily.
7. Main drive motor: frequency conversion motor, large force when starting at low speed, high adjustment range, stable use, easy to repair.
8. The electrical components are made of international famous brands, stable and reliable.
